Fix & Flow Plumbing was called to address a water leak in the front yard. The local water company had already shut off service prior to our arrival to prevent further water loss.
Our team inspected the water line at the foundation entry and then excavated the front yard at the area where water had pooled. The source of the leak was traced to a failed connection between the PEX water line and copper pipe. A SharkBite-style push-to-connect fitting had corroded and blown apart underground an installation method not designed for long-term below-grade use.
With homeowner approval, the failed fitting was removed and replaced with code-compliant, heavy-duty rigid fittings designed specifically for underground copper-to-PEX transitions. The line was reassembled with secure connections, pressurized, and tested.
The system was flushed through multiple hose spigots to clear debris and confirm proper water flow. All connections were monitored under pressure and confirmed leak-free.
The homeowner chose to perform their own backfilling. We advised the use of proper bedding (clean fill or sand) and the avoidance of rocks or sharp material in direct contact with the pipe to prevent future damage.
The Result: The home’s main water line has been permanently repaired with durable, code-compliant fittings, restoring reliable service while protecting against future underground failures.
Our team begins by inspecting the water line at the foundation entry point. We then excavate the area in the front yard where water has pooled to visually locate the exact source of the leak. This process allows us to accurately diagnose the problem before proceeding with repairs.
The repair involved replacing a failed SharkBite-style push-to-connect fitting that had corroded underground. This fitting, connecting PEX to copper pipe, was not designed for long-term below-grade use. It was replaced with code-compliant, heavy-duty rigid fittings specifically designed for durable underground copper-to-PEX transitions.
After replacing the faulty fitting with code-compliant components, the water line is reassembled with secure connections. The system is then pressurized and thoroughly tested to confirm all connections are leak-free. Additionally, the system is flushed through multiple hose spigots to clear any debris and ensure proper water flow.
